Products

Capacity Control

• Capacity control function STEP BY STEP or INVERTER CONTROL
• Starting and stopping the compressor less frequently allows long term operation.
  (No material fatigue caused by vibration during start and stop operations.)
• Decreased power cost through start and stop operations.

Medium Circulation Pump (Optional)

• Designed to match load resistance. (Option)
• Adopted inverter to release air in plumbing after the mold has been replaced for maintenance work. (Option)
• Hot runner temperature maintained inside the mold when operation of the load is stopped (For flow control) (Option)

Customized Specification

Saturated steam is used for the heating source.
Suction head of the refrigerant pump.
Frequency converter of the refrigerant pump.
The liquid contacting sections of the refrigerant circuit are made of SUS (the internal cooling circuit is made with a standard specification)
The "U" or "Y" type strainer on the refrigerator circuit.

Signals with load side devices (Optional)

• A selectable control function for each load.
• Displays alarm and error histories and countermeasures.
• Displays the current flow system (operation status) on screen.
• An analog signal output is provided for each system.
• Switchable operation between remote and local models.
• Communication with remote devices.
• Countermeasure for instantaneous power failure.

Refrigerant

R410A (Substitution of Freon)
The ODP (Ozone Depletion Potential) of this refrigerant is zero.