PET system
PET Resin Dryer
Epoch-making double-level drying hopper for PET resin
The most suitable dryness without degradation is achieved by less than 160 deg C of processing.
- Application
-
- PET Molding
Product features
Molecular Sieve Rotor
The dehumidifier rotor is a honeycomb rotor consisting of walls of molecular sieve adsorbent. As molecular sieve does not lose moisture adsorption performance even at low dew point, it can create ultra low dew point air condition. The honeycomb structure rotor provides larger contact area between adsorbent and processing air, and effectively absorbs moisture. In addition, it can offer stable dehumidified air flow. This rotor deteriorates little with high temperature regeneration, and can offer repeated dehumidification and regeneration with almost no maintenance work.
Drying Capacity
Enough margin for the required dry air flow rate. As the system has capacity to generate air below -50 degC dew point, it can be keep the residual moisture level in chips quite low. The experimental result, residual moisture is less than 10 ppm with drying temperature at 150 degC.