Molding Equipment
Mold Temperature Controller (WATER)
Temperature controlling of higher accuracy
Evaporator has adopted a new shell & tube system, which uses two pumps, one for circulation and the other for the process and by the proportional controlling with the mixing valve, the control range has been expanded.
- Application
-
- Injection Molding for High Cycle
- Blow Molding
- Cooling Roll
- Temperature Control
- 5 to 50 degC
Product features
A High Grade System Built By Reiken Temperature Technology
For temperature controlling of higher accuracy, the evaporator has adopted a new shell & tube system, which uses two pumps, one for circulation and the other for the process and by the proportional controlling with the mixing valve, the control range has been expanded to cover the 5 to 50 degC range. In addition, the heat calories are indicated on the operational panel and the testing functions are integrated for quality stabilization. DCN Controller has thus been developed with aims at truly ideal molding operation.
Calorimeter Display
As the operating conditions displayed, such as
- Set Temperature
- Actual Temperature
- Return Temperature
- Flow Rate
- Pressure Loss
- Loaded Calories
Repeat accuracy of molding conditions is improved and the molding machine is brought under the best control.
Normal Operation Started In One Touch.
An interactive operational panel is adopted for a greater convenience in operation. Setting is simple and easy. Only follow the instruction displayed on the panel. No error. Normally, the equipment is operated full automatically by the data stored in the memory. In case of any failure, the conditions are displayed on the panel for smooth and quick recovery of the trouble.
Control Range
By constructing the internal circulation circuit (controlled at a predetermined temperature) and heating medium circulating circuit (controlled by mixing valve) separately, the control range has been expanded up to 50 degC.
Proportional Control by Mixing Valve (Ampere output 4 to 20mA)
Temperature control of the heating medium used to be done before by turning on and off the freezer, so poor accuracy of temperature control. Besides, material fatigue by the vibration and sometimes breakage (of the freezer) and insufficient cooling caused by the heat generated in the motor at start (because of inadequate insulation of motor) were unavoidable. Adoption of proportional control by the mixing valve has solved all these problems and remarkably improved temperature accuracy.